| 步骤6：重新启动路由器以加载新镜像 为使路由器运行新的Cisco IOS软件镜像，您需要重新加载路由器。请确保您已发出 copy running-config starting-config 命令或者 write memory 命令来保存配置。 3600#write memory 3d01h: %SYS-5-CONFIG_I: Configured from console by vty0 (127.0.0.11) Building configuration... 3600#reload 步骤 7: 检验升级 当路由器开启后，请通过发出 show version 命令确保您当前运行的是新版本。 3640#show version Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-I-M), Version 12.2(7b), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Mon 04-Mar-02 20:23 by pwade Image text-base: 0x600089A8, data-base: 0x60A6A000 ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (f) Router uptime is 2 minutes System returned to ROM by reload System image file is "slot1:c3640-i-mz.122-7b.bin" cisco 3640 (R4700) processor (revision 0x00) with 59392K/6144K bytes of memory. Processor board ID 10524422 R4700 CPU at 100Mhz, Implementation 33, Rev 1.0 Bridging software. X.25 software, Version 3.0.0. 4 Ethernet/IEEE 802.3 interface(s) DRAM configuration is 64 bits wide with parity disabled. 125K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read/Write) 20480K bytes of processor board PCMCIA Slot0 flash (Read/Write) 20480K bytes of processor board PCMCIA Slot1 flash (Read/Write) Configuration register is 0x2102 请检验是否正确使用了版本12.2(7b)，且config - register设定为0x210 |